LEARN HOW TO TEST EMF AND GEOPATHIC STRESS YOURSELF WITH L-RODS

L-Rods are effective tools to measure electric and magnetic fields together. 
The interference of these two fields produces electromagnetic pollution.
They have proved in controlled tests to pick up weak electromagnetic influences as accurately as any scientific instrument. It is a serious mistake to dismiss the L-Rods as non-scientific.
The success of the L-Rods is so evident that science can no longer afford to reject it.

Making L-Rods.
A pair of L-Rods can be easily made with a couple of wire hangers and the shell of two ballpoint pens.

Cut the wire where indicated and bend it to make a right angle. 
Make two of these. Use the shells of ballpoint pens as sleeves on the short end,
to enable the rods to swing more easily.

Now that you have your L-Rods, practice holding them.
The horizontal section of the rods must not rest on the hand and the thumb must not be on the top of the bend, otherwise the rods cannot swing freely. Use the tips of your fingers and thumb to hold them.  Hold the rods by the short end and carry about a foot in front of the chest. Leave  about 15 inches between the two rods.  Make sure that the rods are equally spaced front to back and parallel to your walking surface.

Learning to walk with your L-Rods.
Always walk slowly.  Keep your hands steady and keep the distance between the front and back of the rods equal and parallel to your walking surface, holding the rods about a foot in front of the chest.

Now you are ready to test your ability. You will soon learn to distinguish between twisting, due to your own movements, and those, which are due to Electromagnetic Pollution or Geopathic Stress. When you locate electric and magnetic fields,  it is as if a magnet is pulling on your rods, making them cross.

The key is to practice.  It is not going to be easy at first for everyone but with practice, you will master the art of testing with L-Rods.

Here is a list of things you can try to test with L-Rods:

Electromagnetic Pollution

Your cell phone
Place your cell phone on a table, away from any appliances or electronics or light bulbs. 
Start four feet away, and walk towards your cell phone. The rods will cross and stop,
indicating harmful radiation.

To test the effect of the ELFR Eliminator, apply one chip anywhere on the outside surface of your cell phone.  Perform the same test as above, starting four feet away, and walking towards your cell phone until the rods are above it.  The rods will open, indicating a positive effect and good energy.

Your laptop or computer terminal
Start four feet away and walk towards your laptop or computer terminal. 
The rods will cross and stop to indicate harmful radiation.

To test the effect of the ELFR Eliminator, apply one chip anywhere on the outside surface of
your laptop or one chip on the hard drive and monitor of a desktop computer.
Perform the same test as above, starting four feet away, and walking towards your computer.
The rods will open, indicating a positive effect and good energy.

The food that comes out of your microwave
Place a piece of bread on a corner of the kitchen table.  Start four feet away and walk towards the bread until the rods are above it. Make sure that it is away from any appliances, electronics or light bulbs. If the bread does not move the rods, take that piece of bread and put it in the microwave for ten seconds. Now, test the bread again.  The rods will cross and swing completely around indicating that the bread is radioactive. 
Do not eat it!!!

To test the effect of the ELFR Eliminator, apply one chip anywhere on the outside surface of your microwave. Perform the same test as above, starting four feet away, and walking towards the bread.
The rods will open, indicating a positive effect and good energy.

Testing for Geopathic Stress yourself with L-Rods

Testing mercury lighting
Mercury lighting has the same negative energy as Geopathic Stress.

Start six feet away and walk towards the light bulb until the rods are beneath it to see the rods react. Always walk slowly.  Keep your hands steady and keep the distance between the front and back of the rods equal and parallel to your walking surface, holding the rods about a foot in front of the chest.  They will cross and swing completely around indicating harmful negative energy.

Testing your bed for Geopathic Stress
If you have GS, your bed would be radiating negative energies.

Start four feet away and walk towards the bed until the rods are above it to see if the rods react. Always walk slowly.  Keep your hands steady and keep the distance between the front and back of the rods equal and parallel to your walking surface, holding the rods about a foot in front of the chest.  If the rods find GS, they will cross and swing completely around.

Testing your shoes for Geopathic Stress
If you have GS, your shoes would carry these negative energies.

Place them on a table. Start four feet away and walk towards the shoes until the rods are above it to see if the rods react.  Always walk slowly.  Keep your hands steady and keep the
distance between the front and back of the rods equal and parallel to your walking surface, holding the rods about a foot in front of the chest.  If the rods pick up these energies, they will cross and swing completely around.

Your property – WARNING avoid testing on a rainy day because of lightning!
Difficulty Level 10/10 because of uneven terrain and wind factors.

To find Geopathic Stress vortexes around your home, you will need a pair of L-Rods and some markers like orange cones to see them from a distance.

Start with the front of your house.  Walk with the L-Rods parallel to the house from one property line to the other. Always walk slowly.  Keep your hands steady
and keep the distance between the front and back of the rods equal and parallel to your walking surface, holding the rods about a foot in front of the chest.

Every time the rods swing completely around, indicating a Geopathic Stress vortex, place a marker (cone) on the ground.  Follow these instructions every ten feet.
Do the same with the back and each side of the house.  When looking at the markers, you will be able to see the directions the vortexes are going.

Testing human energy fields.
Try it on your family, friends and pets.

To test family or friends, ask them to remove any batteries in their bio-field like cell phones, watch, keys with batteries etc. for an accurate reading.
They need to stand away from any appliances or electronics and make sure that they are not directly under any light bulbs.

Start 8 feet away and walk towards them.  Always walk slowly.  Keep your hands steady and keep the distance between the front and back of the rods equal and
parallel to your walking surface, holding the rods about a foot in front of the chest.

When the rods enter their energy field, they will do one of three things;

1. Open, indicating natural healthy energy.

2. Cross and stop, indicating Electromagnetic Pollution.
If you have a Lotus Shield, let them hold it for a few minutes and test them again.
The rods will Open, indicating natural healthy energy.

3. Cross and swing completely around, indicating Geopathic Stress.
If you have a Lotus Shield, let them hold it for a few minutes and test them again.
The rods will Open, indicating natural healthy energy.